Guest |189| Posted November 17, 2008 Report Share Posted November 17, 2008 I have put some 750cc injectors in my STI and im using a Vipec V44 pnp. I need to use a resitor pack to allow the ECU to now controll the new injectors. Does anybody know what value resistors i should be using? Thanks in advance Quote Link to comment Share on other sites More sharing options...
bsh Posted November 17, 2008 Report Share Posted November 17, 2008 If inj impedance is less than 6 ohm, use 2.2 ballast, between 2 and 6 ohm, use 4.7 ohm. Greater than 6 ohm, no need for ballast. You can also wire in a peak and hold driver box, which your dealer or Ray can supply. Ben Stian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.