Jo LeForce Posted February 4, 2019 Report Share Posted February 4, 2019 The car is an Evo 7 with plug-in ECU, the car won't exceed the 5500 LC rev limit at any speed unless LC is disabled! LC settings are: 2D launch RPM table, disarm speed 15kph, Launch RPM table: 0 & 5 are at 5500rpm, the rest are all at 7500 the normal rev limit. I have the stock gauge cluster removed & replaced with the AIM Strada 1.2 dash, connected to the ECU via CAN +/-. The dash seems to be getting speed reading from the ECU fine. Any clues what the problem is? Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted February 4, 2019 Report Share Posted February 4, 2019 Under Chassis and Body what is your Speed Source set to ? If looking here does not solve your issue please upload map and log file. Jo LeForce 1 Quote Link to comment Share on other sites More sharing options...
Jo LeForce Posted February 4, 2019 Author Report Share Posted February 4, 2019 20 minutes ago, ClintBHP said: Under Chassis and Body what is your Speed Source set to ? If looking here does not solve your issue please upload map and log file. Driven wheel speed source is set to: LF Wheel Speed Non driven wheel speed source is set to: off Never bothered to check there since my ECU is plug-in & I'm getting speed readings fine on my dash Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted February 4, 2019 Report Share Posted February 4, 2019 Change that to : Driven wheel speed source is set to: OFF Non driven wheel speed source is set to: LF Wheel Speed Jo LeForce 1 Quote Link to comment Share on other sites More sharing options...
Jo LeForce Posted February 5, 2019 Author Report Share Posted February 5, 2019 Yes, that did the trick Thank you Clint Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.