Hx30power
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Downloads
Posts posted by Hx30power
-
-
Thank you for the quick response. I am looking a parallel turbo setup, as I think it would be easier to control, I want to keep auto as a road car but like all my cars I charge it to manual eventually lol. Well I need to do a bit of homework on the wiring and what commands what but really appreciate it.
Kind regards bret
-
Hi all I'm just after some advice, I have a legacy bh5 that's in a stock automatic form, I want tk put a link on it as I have on my other cars, but don't k ow if it is compatible with the auto. Any views??
-
i did try this but the AFR the ecu was seeing was not the same as what was displayed ont the gauge. i have messed up its not lc2 its a innovate mtx-1 afr gauge
-
Hi all im after a little help i have a car in with a link g4+ fitted it has pretty much all the cal tables used other than cal table one. i haven never configured on these tables can anyone help me, innovates instructions say 0v = 7.35, 5v = 22.39. how do i scale the table any help would be greatly appreciated.
-
Thank you for the reply do you think I could use an arduino to control it??
-
Hello all after a bit of advice if possible? I am looking at build an A series mini turbo but want to run a VNT turbo and use the electronic actuator that it comes with. The info i have on the actuator is vague but from the info i have got i think i could run it on the wastegate and control it through the wastegate duty. any help on this would be greatly appreciated. Part number on the actuator is Garrett 767649
-
I'll try that thank you
-
Thank you for the response.
I have removed the coil and put a temp ht lead fro. The coil to the plug with the clamp in line. The set up is falling. Ignition delay 65us and the dwell is 1.0ms.
-
Hi all please can someone help me with an issue I have?. I have a link g4+ on my boosted civic. Which I have fitted k20 ignition coils. When I test and crank the coils the fire the plugs but when I put my timing light in line r to the plug my light does not flash I have now tried 3 lights all work on other cars. It's the first start up since the build and cannot set ignition timing. Also I have a trigger wheel installed on the crank. Thank you in advance.
R35 oem injector dead times
in G4+
Posted
Hi all this question has probably been asked loads. But I cnt find any info I'm looking for the injector dead times a short pulse width figures can anyone help please.