SidewayzSkyvia
-
Posts
54 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by SidewayzSkyvia
-
-
I've been doing some research and think I have everything figured out. But then I saw there is a link remote e throttle module. So my question is, would it be possible to wire up the throttle body and accel pedal straight to ECU with xs connectors. Or is this module required?
Also is there any wiring in the pclink help page for the accel pedal sensor? I know the tb wiring is in there. But I'm not able to check for app sensor info right now as I'm not at my computer.
Thanks for any and all help.
Also if it matters I plan on going with a Dodge vdo(hemi) tb and a 350z or sti pedal. ECU is a z32 g4+.
-
Awesome. That's what I was thinking but needed a sanity check to make sure it would work. I just measured my car and the gauge sends a 7 volt reference. So I'm sure a 5 volt would work. And I have the resistance values saved somewhere so I'm gonna give this a try. Thanks for confirming my idea.
-
Got an idea, did a little searching and haven't come up with anything solid.
So my question is, would it be possible to use a spare input on a z32 g4+ plug in to read resistance from a fuel level sender? I think it would be cool to be able to set it up and be able to read gas level over a can display. As I'm planning on removing factory gauges and just using a can display.
Thanks for any and all input.
Another g4+ e-throttle question
in G4+
Posted
Ok so follow up question, is there anywhere online I could purchase the module that you know of? Or would I need to find a local-ish dealer and go through them? I did a little bit of searching but couldn't come up with Anything.