[Electro hydraulic power steer pump control.]

I plan on using a Mini Cooper electric pump. Does anyone have the canbus info for that?

 

[Fury or thunder X]

Awesome. Thank you!

[Fury or thunder X]

Any idea on a time frame for a fury or thunder with the new X platform?

Thanks

[ibiza 20vt no rpm gauge oil pressure light]

The oil Pressure light, from memory, is wired to the cluster from the filter housing. 

Are the cluster plugs seated in all the way? I've had problems on mk4 chassis' with the connector housing breaking and causing weird problems. 

[ibiza 20vt no rpm gauge oil pressure light]

The wiring harness between the ecu and cluster

[ibiza 20vt no rpm gauge oil pressure light]

How is the wiring?

[Torque reduction]

It sends the amount of reduction required. 

[Torque reduction]

Thank you

[Torque reduction]

Is it possible to initiate gear shift torque reduction via canbus?

[Fuel Pressure Sensor recommendations]

26 minutes ago, 928sg said:

I looked at this one but it has a limitation of 50 PSI.    I'm not planning on running much higher, but I don't want to run on the edge of a sensor's capabilities.   I looked at this one that is rated at 100 PSI:

https://www.summitracing.com/tx/parts/avm-30-2130-100/overview

That's a solid sensor. There are 15-20 cars local to me running the same one. 

[Bank's power iDash 1.8]

Does it plug into the obd2 plug?

[Help setting up temp sensor]

Should be pretty simple, just input the temp vs resistance values. The manual is really good at explaining how to add it in to your the tune. 

[4.4 v8 vdo bmw throttle body]

Do you have a part number or know what the base car it came off?

[New ECU has died]

Is there power going to the ecu?

[DSG 7 speed controller]

Negatory. Syvecs or ecumaster are the only 2 that I know that will work with a dsg trans. 

[Digital pressure sensor]

I just enjoy trying different ideas and methods. Nobody builds a better mousetrap by building it the same way their father built it.

[Digital pressure sensor]

Has anyone played with one of these as a map sensor? 

Data sheet

[Dsg compatibility]

Understood, thank you

[Electronic Wastegate Actuator]

I have been doing some research on the same thing, I am curious how this turns out. 

[Dsg compatibility]

Ok, I have access to a couple factory dsg cars. I don't know much about disassembly and coding, is this something I can hook up a can sniffer and sort out?

[Dsg compatibility]

Hello all, I have a thunder ecu I am going to run in a Vw mk4 with a turbo 07k 5 cylinder. I have a conventional 6 speed manual trans already, I am curious about setting it up with a dsg transmission. I have found out syvecs can be setup to send the correct canbus info to the dsg mechatronic system. Has anyone here played with this on a link ecu?

 

Thanks, Joel