Bayleebryson
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Bayleebryson
-
-
Engine fan
in G4+
Yeah the engine has been run on the dyno and all sensor's calibrated and aux output is the correct one. They turn on when I switch it to test on but not buy there self at the desired temp
-
Engine fan
in G4+
I have my ect fan switched through my ecu but when set as engine fan 1,2,3 and passes the desired temp it doesnt switch on but when I use test on there is no issues. Any ideas
-
Does 12v still work. And what's the advantages if both ways work using the grounding method
-
When wiring my high low boost switch in and anti lag I'm planning on using a on off switch. Can I just supply 12v to one side of the switch and conect the digital input wire to the other side cheers
-
im in the process of wiring my ecu and need to know the amperage draw of four toyota yaris coils worst case scenario. just seeing if i can run them off the same 12v power as injectors or have to run it through another relay. cheers
-
1 hour ago, Adamw said:
The VCT on a SR20 doesnot have a position sensor, it is just an on/off system like the old honda VTEC. All you have it the aux output switched on or off at a certain RPM
Mint cheers for the reply I thought this was the case.
-
When wiring the storm black do I need a digital input for the vct to work on the sr20det or will it run off the triggers
I know I need to wire the solenoid to a auxiliary output. Just dont know if I need to wire the digital input to a variable timing sensor?
Engine fan
in G4+
Posted
Yeah that is right. They dont switch on. But I know it's on the ecu side because you can switch them on manually