sokudo performance
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by sokudo performance
-
-
Hi Adam, yes sir. These turn off when the ECU is online. I went in an disabled ECU hold power.
-
Hi all,
I have installed a storm ecu on a 1jzgte non-vvti engine. I have a wiring specialties pro harness with a interface harness.
I am currently working on a start up/base map and i am running into a non-start issue.
I have tested the injectors and coils and all work correctly in test mode, but i am not getting spark while cranking. I have looked up the trigger parameters in the help section and have put in the desired trigger settings for trigger 1 & 2, (trigger 2 VVT set to OFF). I also noticed i am not registering a engine speed either, so i assume my trigger is off. I have a aftermarket intake manifold, so cam sensor is going to the sensor closest to the cam gears.
I was hoping one of you experts could take a look at my calibration file and give me your thoughts.
Thank you in advance for the help.
1JZGTE Non-VVTI - Storm ECU
in G4+
Posted
Hi Adam, i ran a trigger scope and will attach this afternoon. I changed the offset and it fired right up.
I still need to check timing with it locked. I will check and send a copy of the trigger scope. Thank you!