Jump to content

PorterDsm

Members
  • Posts

    8
  • Joined

  • Last visited

Posts posted by PorterDsm

  1. i have switched between the 1-6 and 7-9 both will not start the car, but ill leave it on 1-6. i did briefly go through the pre start checks. i didn't hook up the built in 3 bar map sensor, and did not adjust master fuel. I'm gonna go through it thoroughly today after work. The map sensor says its at 14.3 psi with the car not running?? 

  2. I never switched 1/4 and 2/3 but I thought about it. Instead I just checked spark under ignition. I turned IGN 1 on and both 1/4 were sparking strong, same with IGN 2 on, 2/3 were sparking. Just to humor the theory though I ran out there and switched them and the car didn’t want to even try to fire. The car acts like it wants to fire with wires the right way..... I’m open to any suggestions, just kinda stumped.

  3. Yes it did have a back fire. I did the trigger scope and it doesn't appear like anything is happening but the rpms are still moving. I found out that my engine has the 95-96 cam sensor on it instead of the 97-99 cam sensor. The 97-99 cam sensor set up is the same as the evo 8. While thinking about it, the 95-96 (intake) cam sensor reads off of the cam gear side in which the cam is rotating clockwise also the way the sensor is reading. The 97-99 reads on the opposite side (passenger) of the same cam (intake) rotating counter clockwise. I read online about it and those did have to be inverted like you said. trigger scope log 1.llgWould that have anything to do with it?? 

    trigger scope log 2.llg trigger scope 3.llg

×
×
  • Create New...