addex

I'l try sourcing power direct from battery thru a relay to see if that makes a difference, it currently powers u via piggybacked ignition power. attached are the files requested VH E85 tune sent file.pclr MXS 1.2 Strada - Link Config.zconfig

Hi have been having constant issues with the Aim Dash 'dropping out' as in it will display data then reverts to zero as if ecu is not connected, also the dash does not always turn on, goes to a lit up black screen with the 4 grey panels next to buttons as seen in attached picture. I first suspected it may have something to do with Can system connection so i've tried Deutsh plug and also soldering joint. Could the dash not turning on have to do with too much currant draw on system when key on and goes to a safety mode? I also need to connect in a TCI EZ-TCU for the 4l60e into Can system, I currently have it as a 3way join, the EZ-TCU is getting the throttle position reading although no settings have been put in the CAN Setup for the trans controller- could i get some guidance in how to set this up or if it is possible Thank you

Thank you, think im sorted for now.

G4+ Xtreme to Street MSX Strada 1.2 how do i enable CAN2 function - D9 and D10 dont have Can selection, they are wired in but function selection is off, as you can see in the background of ECU info pic attached they are throwing a fault code? ***EDIT*** Error code Aux9/10 may be different issue, Aux 9 and 10 are connected to oxy sensor and second fuel pump

Hi How do i find the Can ID to connect the strata dash? Also I'm trying to use Can2 output wires from Link or do i have to purchase and use the CANF plug Thanks