[Evo G4+ pnp with Haltech IC-7 dash - no data]

Changed the can I'd to 1400 and everything is working like a charm! 

To follow on, is there a way to get fuel level to be displayed over CAN using the factory resistance based float?

[Evo G4+ pnp with Haltech IC-7 dash - no data]

Thank you for the quick reply Adam. I'll give these settings a crack either tonight or tomorrow morning and report back

[Evo G4+ pnp with Haltech IC-7 dash - no data]

Hi guys, so I've just got my hands on a Haltech IC-7 dash. Im running a G4+ pnp for Evo 8. 

The dash is running current firmware and I have selected Link G4 from the configuration list on the haltech software. I am using the connection cable that is offered by haltech(came with the kit) plugged in to CAN1/RS232, 12v is coming from a switched acc/ign and ground is going to a chassis ground.

On PC Link i am using the following settings (see attached image) but I have no data streaming to the dash at all. If I change the configuration to OBD2 on the haltech software i am able to get a battery voltage reading and nothing else indicating to me the dash is working and wired up correctly?

Can some one point out what i am doing wrong?

Thank you!