Paul Dare

I agree totally i do not have a link to the calibration for my unit cheers

I saw that when i was going through the set up . I tried several different sensors and rechecked my wiring using a brand new 2 bar pat premier unit . I replaced all sensors and injectors when i installed the link system so that i started with a complete new system

Yes msd 7al2 plus and single hvc coil I have not set a map yet , waiting for my dealer to do a base map do you have a base map to get me to the tuner ? Getting the log not sure what you mean by pc capture

Also trigger type i have set to 1 tooth per tdc

Just checked , yes i do have rpm while cranking

Hi Guys replacing fast xfi system with thunder (chalk and cheese) on 426 hemi using msd dual sync and struggling with trigger set up dual hall sensors in distributer trigger 1 type set to optical / hall filterlow trigger pull up on trigger edge rising trigger 2 optical filter low trigger pull up on trigger edge rising sync x1 sync position after cly one when cranking with timing light no flash of light nor spark when testing with plug on lead earthed have i missed something cheers Paul

Hello guys, I have followed the above advice for the .DLL issue, and it is still not working for me. Any further advice?