Paul Dare
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Downloads
Posts posted by Paul Dare
-
-
I saw that when i was going through the set up . I tried several different sensors and rechecked my wiring
using a brand new 2 bar pat premier unit . I replaced all sensors and injectors when i installed the link system so that i started with a complete new system
-
Yes msd 7al2 plus and single hvc coil
I have not set a map yet , waiting for my dealer to do a base map
do you have a base map to get me to the tuner ? Getting the log not sure what you mean by pc capture -
Also trigger type i have set to 1 tooth per tdc
-
Just checked , yes i do have rpm while cranking
-
Hi Guys replacing fast xfi system with thunder (chalk and cheese) on 426 hemi using msd dual sync and struggling with trigger set up
dual hall sensors in distributer trigger 1 type set to optical / hall filterlow trigger pull up on trigger edge rising
trigger 2 optical filter low trigger pull up on trigger edge rising sync x1 sync position after cly one
when cranking with timing light no flash of light nor spark when testing with plug on lead earthed
have i missed something cheers Paul
-
Hello guys,
I have followed the above advice for the .DLL issue, and it is still not working for me. Any further advice?
Msd dual syn trigger set up
in G4+
Posted
I agree totally i do not have a link to the calibration for my unit
cheers