Rbeetle40

Sorry its taken so long I got covid and have been pretty unwell just got out in the garage today to get the log data to upload to link website.llgx

It was the trigger wheel thought it was standard but turned out to already have a aem unit inside ... its now sparking too but still can't get it to start

So I have a rb25 using a fury ecu I just got to test everything and all spark and injectors tested up fine But when cranking I loose spark I took the cas off and turned by hand and I can hear the injectors clicking but no spark (had a dummy plug in 2 coils to check) The ecu is receiving both triggers correctly weather they are set up correctly I dont know as its just on a base map but trigger 1 and 2 are working I checked the safety features (ignition cut etc and they are off) Any help would be greatly appreciated

Hi guys I just wired in my link fury to the rb25 And everything has tested up good injectors and ignition no problem at test atall But on cranking only the injectors fire. No spark i tested this by taking the cas off and turning by hand and I can hear the injectors clicking and had a coil out with a plug in it earthing it to the block to see a spark but nothing. I am getting trigger logs weather they are set up right or not I dont know ... they are just on the base map settings I have checked the ecu lock and ignition cut etc all that safety features and its all off hopefully someone can help