[Fury on rb25 no spark]

Sorry its taken so long I got covid and have been pretty unwell    just got out in the garage today to get the log 

data to upload to link website.llgx

[Fury on rb25 no spark]

On 1/8/2021 at 3:56 AM, Adamw said:

Can you attach the tune and a log of it cranking.

It was the trigger wheel     thought it was standard but turned out to already have a aem unit inside ...     its now sparking too but still can't get it to start 

[Fury on rb25 no spark]

So I have a rb25 using a fury ecu   

I just got to test everything and all spark and injectors tested up fine      

But when cranking I loose spark        I took the cas off and turned by hand and I can hear the injectors clicking but no spark   (had a dummy plug in 2 coils to check)    

The ecu is receiving both triggers correctly     weather they are set up correctly I dont know as its just on a base map     but trigger 1 and 2 are working    

I checked the safety features   (ignition cut etc and they are off)     

Any help would be greatly appreciated 

[Matthew dennett]

Hi guys   

I just wired in my link fury to the rb25 

And everything has tested up good     injectors and ignition no problem at test atall    

But on cranking only the injectors fire. No spark       i tested this by taking the cas off and turning by hand and I can hear the injectors clicking       and had a coil out with a plug in it earthing it to the block to see a spark but nothing.   

 

I am getting trigger logs    weather they are set up right or not I dont know   ... they are just on the base map settings    

I have checked the ecu lock and ignition cut etc   all that safety features and its all off        hopefully someone can help