Adriel

You saved me once again @Adamw Thank you!

On my Link ECU, I already set the 'LR Wheel Speed' at DI 3, Link's reading accurately. To communicate Link's 'LR Wheel Speed' into the MoTeC dash, MoTeC's 'Dig In 2 Speed' channel would already be set to read Link's LR Wheel Speed. The MoTeC dash reads everything from Link accurately except for this 'LR Wheel Speed' input. On the road, cruising at 50km/h, Link's showing accurately at 50km/h, while on the MoTeC dash, it shows 5km/h only. With 80km/h, the dash only shows 8km/h, and so on. I'm not sure of what I'm doing wrong here. Please help.

Dang I wish I knew about this. You wouldn't believe how happy I am right now! Thank you so much Adamw!

Already did the wiring to the GTR Plugin ECU, plugged the dash display into CAN 2. The problem I'm having now is setting up the CAN BUS. Already did the first few parts following the guide in Help. On the CAN Setup, already did CAN 2, User Defined, 1Mbit/s, with OBD OFF. In Data, still following the guide in Help, I choose Channel 1: Transmit Generic Dash with 20 Hz. Now with the CAN ID, I'm not sure of how I can get the CAN ID from the dash display, I tried the 1520 CAN ID but I don't think I see any readings from the ECU in the dash, only the dash's own readings.