[Subaru EZ30R Knock Setup]

Has anyone already created a Knock target table and knock ignition trim for each cylinder for an EZ30R?

Cheers 

[EJ25 N/A non runner]

13 hours ago, Adamw said:

Your log doesnt show any cranking, it is just 20 seconds of nothing.  Battery voltage doesnt change so definitely wasnt cranking when that log was recorded.  Can you do another one.  Triggerscope looks ok.

What size injectors?  That master of 13ms would be suitable for something like 800cc injectors.  I susgesst changing your pre-crank prime to "key on" since you dont have a start position DI assigned.

Also, not really related but I noticed the log shows it is commanding 25% throttle for start up so you should look at that before attempting another start up.  It is coming from target + base position + start up step.  

Cheers for the reply I’ll do another log, I believe the injectors are 280  Subaru part number 16611-AA680, so the master will be way out, do you know what I require for the injectors?

yeah I noticed that later on, the idle base position table figures were really high along with the start up step table.

cheers 

[EJ25 N/A non runner]

18 hours ago, Adamw said:

Have you checked base timing with a timing light?  Please attach your map an a log of it cranking.

Checked base timing I should be near enough there. I have used the V9 Subaru base map to start however that's a quad cam turbo motor with AVCS and the engine i have is NA twin cam with switched cams. So the tables are probably way out.

 

Subaru EJ253 EThrottle.pclr Log 2021-02-20 4;08;37 pm.llg Trigger Scope Log 2021-02-20 4;12;23 pm.llg

[EJ25 N/A non runner]

Got an EJ25 N/A Gen 3 engine e-throttle on a G4+ Xtreme. 

In need of some help on the ignition timing or fueling as i cant get the sod to run. 

Does anyone have a base ignition map for an NA at all?

Cheers

[EJ25 NA Fuel table help.]

Cheers Adam,

Given that a whirl this morning and she's not firing up, its like a timing issue as getting a pop now and then.

I was able to record a log if you could have look with your expert eye that would be most appreciated.

Cheers

Sean 

Log 2021-02-17 9;40;25 am.llg

[EJ25 NA Fuel table help.]

Hello,

need a little help with creating a fuel table for an EJ25 NA engine, I started using the preset setup for a WRX as the engine I am using has VVT (cam switch not ACVS) and e throttle.

Any help would be appreciated.

Cheers

Subaru EJ253 COASTVW Ethrottle possible.pclr