Hello, I've installed the furyx into my 2g dsm and I'm having issues with cylinders 1&2 not firing, it runs very poorly on cylinders 3&4 only.
Setup: Denso COP wired for direct spark, sequential fuel injection, kiggly 12 tooth crank sensor, 1g dsm CAS with one of the optical slots blocked (see trigger scope attached).
Checks: I've verified wiring to correct cylinders for ignition coils and injectors using a timing light and LED strip light, mechanical timing, weak coil(s) or cracked spark plug(s), verified compression.. and finally, trigger settings (see current settings attached).
Maybe I've missed a thread on this but I am wondering how to determine the sync tooth under trigger 1 parameters? With the 12 tooth trigger do I consider the tooth after TDC as #1 and count from there comparing to the cam sensor until the cam sensor is about to trigger and its the following tooth? Can the count be determined from the trigger scope?
Also to double check, firing order should be set to 1342, correct?
Thanks in advance!
TriggerScopeLog4_18_21.llgx
PC Datalog - 2021-04-18 1;09;03 pm.llgx
bluegsx_1995 got a reaction from servicesoon in 4g63 Trigger sync tooth