BHPerformance

Would it be possible to activate the CE Light when the ect temp gets to certain level so say 110c i know we can lower RPM but wanted it to turn on a light on dash as well car in question is a suzuki swift has can dash and the water temp gauge works but it not that accurat. Only way i could think is check raw voltage at 110c in live readings and set that to the error high voltage

oh ok perfect thank you, there doesn't seem to be any fail safe there's a level sensor in the tank but it hasn't been wired up guess my best advice is to play it safe until it has a fail safe and don't use a 4d fuel and ignition table

Hi currently have a mini R53 want to set up the water meth its already been wired up but I'm sure its incorrect looking at it they've pwm the pump and the solenoid is just going to switch on / off, wouldn't it be better to switch the pump on and pwm the solenoid ?

Many thanks Adam this has worked extremely appreciated. How much do i owe you for doing this ?

Many thanks Adam hopefully this will work cause not sure what else can be done with it. swift partbox is the locked file swift partbox (1).pclr new swift bhp file.pclr

Hi I have a swift 2008 could anyone help getting the clocks to work for rev counter and water temp willing to pay its running a monsoon ecu. Car acme in with a locked map file clocks all worked fine but i cant pull the can setting off the original map file have original map file if that helps but its locked out