kazuyaito2002
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by kazuyaito2002
-
-
-
-
-
-
-
-
-
-
-
Hello! please tell me! I deleted the unused view on the PC link, but I deleted the 3D of the fuel table and could not display it again. I have tried various things, but it is still impossible to display. Two ignition maps are displayed, what should I do?
1 minute ago, kazuyaito2002 said:こんにちは!教えてください!PCリンクの未使用のビューを削除しましたが、燃料テーブルの3Dを削除して、再度表示できませんでした。いろいろ試してみましたが、まだ表示できません。2つの点火マップが表示されます。どうすればよいですか?
-
Hello! Finally AFR EGT setting is completed. Thank you for teaching me a lot!
I would like to drive and try various things from now on. If you have any questions, please let me know! Thank you! -
How can I change the display from lambda to A / F?
-
Thank you! Adamu!
I tried setting it earlier and it became possible to display it, but I was in trouble because the numerical value was strange!
I would like to try it by entering the numerical value that I was told immediately!
Thank you! Thank you! -
I was able to confirm the analog input. I was able to confirm + 5V with analog No. 10. I was able to confirm the voltage of the A / F EGT. However, it cannot be displayed in the PC Link settings. I don't know which one to set.
I don't have enough understanding of my software, so I set it while studying, but I was in trouble. -
Thank you! I'll try. I will report later
-
-
-
-
Hello! I'm a beginner. I have a CT9A8, but I want to input PLX O2 and PLX EGT with the EVO8 plug-in G4X, but it is not displayed. Additional port Volt9 A / F Volt EGT is connected GND is connected to ECU No46 GND. Both O2 and EGT are connected with 0-5V analog output. I look forward to working with you.
Volt 10 PLX EGT
Windows11
in G4x
Posted
Thank you to everyone for their advice! !! Online connection with LINK ECU! appreciate! !!