Kolle-tech

None??

Hi, Does anybody have latency, Injector Short Pulse Width Adder and Min Effective Pulse Width for those injectors?

Hi Adam, thanks for answering. I have already tried swapping the polarity. Probably the 2nd possibility When i measure the signal in to the converter, it is the same with or without the abs ecu connected. I've also tried to feed the converter with 5v&ground from the abs ecu, still no output from the converter. Any ideas?

Hi, I have an issue with my g4+ extreme (red). I was trying to get my existing abs sensors to work as wheel speed. I have 2pcs vems vr to hall converter connected to convert the signal and get it divided. All works great as long as i don't connect my abs ecu. I've measured the signal from vr sensors with a scope, and the signal is the same with abs ecu connected and with abs ecu disconnected. Why is it not working? No signal out from the vems converter when i plug in the connector to the abs ecu. Wired like this: Dsub 9 Vems vr to hall converter 1. +5V - to G4+ 5V 3. Divider Reset - to G4+ signal ground 5. GND - to G4+ signal ground 8. Div by 4 - to G4+ DI 2 The other end of converter is tapped on the abs sensor going to abs ecu pin30 gnd and pin48 signal+ e36 abs diagram 92-94.pdf Anybody have an idea how to solve this issue? VR_divider_full.pdf