Jump to content

Alex C

Members
  • Posts

    6
  • Joined

  • Last visited

Alex C's Achievements

  1. yeah I caught that I was having some issues with the charging circuit (so I had disconnected it to review my wiring later) thanks for the heads up. I increased the master fuel, it can hold idle much longer now! thanks Adam. I need to sort through why it's bobbing up and down between 700-1500rpm over and over. Could be issues with the warmup fueling
  2. Just an update ~ I installed the new parts and got my fuel pressure down to a reasonable number (about 45ish). I can get the car to fire up, idle for a few seconds then die off. I posted a log here if anyone has any input, just curious on what you guys think. I appreciate all the help. Thanks, Alex PC Datalog - 2022-01-14 5;37;35 pm.llgx 20220114_firesupbutdoesntholdidle.pclx
  3. I really appreciate everyone's help. I found my fuel pressure was super high (82psi) and I finally got an adjustable one in the mail. The back order has been killing me. I'm going to pop it on today and try again. I'll have a new update this evening, thank you! :)
  4. Hey Adam, I cut my master fuel down to 2ms and continued to reduce the fuel table around idle area to get it pretty close to fire up. Do you think my ignition table is too aggressive? A few people mentioned it. I copied the one used for the s6 basemap that's on the software download. @Adamw
  5. this is awesome thanks Adam for the direction! I'll give it a shot and see what happens.
  6. hi all, I have a strange issue I can't get to the bottom of here. Basically when im running the software/trying to start the car and have the fuel pump on I have no luck. when i try to turn over the car with the pump off i am able to get the car to idle for ~10ish seconds. if i try to turn the pump on during that first idle time it immediately dies. the pump is not wired to the ecu, it's controlled with it's own toggle switch on the dashboard. should the pump be wired to the ecu or is this another issue all together? I've tried digging around the wiring to see if there was an issue and didn't find anything unusual. I appreciate any input you guys may have! I also attached the log onto this post to see if maybe someone see's something wrong with it? ecu: monsoonx primary inj: 1050 secondary: 1700 fuel pump walbro 460 13b streetport 202112191001_idleswithpumpoff.pclx
×
×
  • Create New...