Donny

I have set a speed lockout for idle control. Log：https://drive.google.com/file/d/1VIdtbb5Sx_KCBAfLb5L1mEf5CaQ49hNl/view?usp=drivesdk

Hi,Adamw. I have set Dashpot Corrections,but the log shows that it did not take effect at that time. I want to upload the log record, but it's too large. How else can I upload it?

Hi Adamw.I have an EJ205 of SG5.It has two “Tumble generator valve” and two “Tumble generator valve position sensor”, but in the help manual, only “Inlet Cam Position Solenoid” needs to be connected.I can't match them.How can I connect “Tumble generator valve” and “Tumble generator valve position sensor” to the ECU?

Thanks a lot. I finally chose realcash, but in the process of using it, I found that there is no data on the water temperature and intake air temperature when idling. It will be displayed only when I step on the accelerator. What's the problem?

Hi，Adamw，I found that I can't use obdlink, the original app of obdlink MX +, to read ECU data. Do you have a setting method？

Can I see the air-fuel ratio data on realdash through OBDlink MX +? My ECU is G4X FURY.

Hi，Adamw.I use the same settings as you, but the startup is very slow. The original computer can be started after twice compression, but now it takes about 4 seconds

My engine is Subaru eg33. It has two crankshaft position sensors and one camshaft position sensor. I'm currently set to trigger pattern with a missing tooth on trigger 1, but it starts slowly. Who has a better solution? The following is the original maintenance manual.

你好！ 我有一个带有ARM芯片的平板电脑，这让我在车上调试起来更容易。但PC Link 在Windows ARM 系统下无法识别ECU。那么，能否发布一个适用于Windows ARM 系统的G4X 驱动程序？ tks很多！