EVLTEZ

im trying to get the ecu to calibrate the tps but i get H bridge reveased an the throttle plate stays open. also getting a code that says something to do with the tracking of the tps. then shuts down the throttle body. its fine if u granny drive, but once u go to overtake it throws the code, shuts down throttle body. kind of like blimp the throttle when changing down a gear. thanks mate, do i unplug the 4-wire grey plug on the left-hand side and use the pedal to achieve the min/max values? or do i reach in an move the plate by hand with the same plug?

hey guys I've been dealing with a E throttle problem on my Altezza 3sge plus t with a plug n play link g4. came up with code 75 I've checked throttle body gears, plugs etc. an tried to recalibrate the APS an TPS, I can get the APS to successfully recalibrate but when come to the TPS i get the error H BRIDGE IS REVEARSED what am i doing wrong? it had been done b4 hand but did give problems while setup. I've added a log so hopefully you able to see what's going on. cheers PC Datalog - 2022-10-26 6;18;01 pm e throttle problem.llgx

wasnt really to keen to do WOT b4 tune. that was only a short distance in a 50k zone, AEM is 30-0300 im guessing ive wired it up wrong due to them not the same. only wanting the ecu to know what the gauge is saying.so it can correct things if something happens. cheers

hey mate was able to sort out the e throttle. had taken it for a small drive etc, drove very nice, making all the right sounds, besides the wastgate opening up, not sure if i was making boost or not. ive done a log in that short drive, wondering if you can see it making boost, wastegate spring meant to be 5psi. also if you think its ready for tuning. also tired to wire in my AEM uego AFR gauge white wire to narrow o2 sensor an brown wire to ground in ecu, calbrated it to the aem but shows in the range of 7.8, gauge saying 10-11ish use to sit on 14.7 without it wired to the ecu. did i do the wiring wrong for the AFR? cheers PC Datalog - 2022-03-25 4;45;56 pm new.llgx

hey mate my tuner had remotely connected to my ecu, he had loaded one of his maps then changed a few things to get mine to idle alot more stable. so i was able to move it around the place. but throttle is like its been disabled at the moment. if i load your guys base map again an go threw the e throttle setup it should work correctly? what % should i be seeing if its calibrated correctly? also there 2 base maps for the altezza. do i use the base map that has 7 bar in the title since it had a 7 bar sticker on the ecu packaging? just to clearly i have the correct map. cheers

good morning i have now removed the lock, done a log with some pedal movement while the car not running. recalibrated APS then TPS they calibrated but still saying its 40% open. cheers new log.pclx PC Datalog - 2022-03-20 11;08;20 am.llgx

at the moment i have a e throttle lock in place at this stage but rather the e throttle to be working send.pclx

Hey mate, Hopefully I've uploading the correct ones you after cheers

hi there ive been having issues try to calibrate my e throttle TPS, which i have manage to get it to calibrate by upping the voltage from 4.85 to 5v but i have no control over the throttle, ive set APS while e throttle is disable like it says but still i get nothing, even tired in setup mode,still nothing. wondering if any of the selected ins an outs, voltage is correct on each selection. ive added alog so hopefully it shows. sorry new to this whole thing. cheers for the help PC Datalog - 2022-03-18 7;38;45 pm new log.llgx