Hi
I'm setting up a G4X AtomX on a Daihatsu Charade G200 with a modified HE-E engine. Engine was previously running a EMS Stinger 4424.
I also have a SR20 SR20DET silvia running a G4+ plugin, which has been great.
Anyway, I'm having trouble setting up the trigger. I've tried a few settings, but have ended up using multitooth / missing, with trigger 1 reluctor, position cam, 4 tooth, 1/1/1
When I run the spark test, I get spark. To do this, I move the crank to TDC, and the spark comes out on #1. Great. So the ignitor, wiring and configuration for spark is correct.
When I crank, I get a RPM value, but in the log, it seems to stop and start. There are errors shown.
I get "Ign1 - Ignition" going green and showing active while cranking, but none of the plugs are getting spark.
Attached are some logs, config, and some photos of the pickup in the distributor.
Any ideas?
Thanks!!
PC Datalog - 2022-06-22 8;19;39 pm.llgx
charade setup4.pclx