Jump to content

Bazzman

Members
 View Profile  See their activity

  • Posts

    20

  • Joined

  • Last visited

 Content Type 

Posts posted by Bazzman

  4. Gear shift control

    in G4x

    Posted

    Looks like I need a strain gauge lever,  

    Is digital switch (micro switch on a tension spring) an option for start shift mode then gear barrel for end shift or is this not functional. 

    Thanks again

  5. Is this Trigger Scope Normal

    in G4x

    Posted

    I really appreciate the help,  I'm amazed you offer the help and set up you give at no charge, 

    I did a bit of logging and checking today,  the vvt only got to 34 degrees,  I then had a good look at another cam phaser I had on my bench and it only moves 17degrees, this is good news as at full advance the falling edge of the cam tooth I was worried may come into the sync window does not, and not by quite a way, so I think I'm going to be safe there.  

    I guess the vvt tables that appear when you select the mazda 3 vvt setup are very generic as the go to 50 degrees of advance which the mazda vvt phaser can not achieve. Is there an easy way to take these tables and change to suit as a start point for tuning or is it best to just wait till it's on the dyno and start from zeros.

    Thanks again for being a legend

     

  6. Is this Trigger Scope Normal

    in G4x

    Posted

    I think I'll take 2 teeth off, just have no idea what 2 will be best,  definitely the one that comes close to interfering in the sync area,  but the second not so sure. It's it better for the ecu to have more teeth on one crank rotation to the other or as long as they're in different orientation it will work this out relatively easily.  I'm thinking just remove one of each of the 2 close pairs. 

  8. Is this Trigger Scope Normal

    in G4x

    Posted

    Factory pulley is a big heavy damper pulley with no keyway and too large of a diameter poly v for the revs intended in this application.  

    Bugger is all I can say, 

    Surprising that Kent cams doesn't change the cam wheel to suit being it is a dedicated vvt cam intended for competition. 

    If I took off the 2 teeth circled in red then it would leave a decent window to use the green tooth as the cam tooth to be picked up right?

     

    20221209_120235.jpg

  13. Is this Trigger Scope Normal

    in G4x

    Posted

    Just wondering if this scope is normal or is trigger 2 odd? For some reason in my mind I would've thought they would all be the same length as the teeth are all same size.

    If it is O.K any ideas on cam pulse window sync tooth? Currently at 1 with 50 degree swing, starts and runs fine every time but to me it is very close to a cam tooth on either stroke having a chance of being in the window.

    Trigger escort.llgx

  14. Gear shift control

    in G4x

    Posted

    That is the settings from a mates g4+ gear control but of course he doesn't have the dog unload so those are just generic.  

    I find it strange there is cut for down shifts but is this maybe to help as he doesn't rev match?

    The gear barrel is very accurate and I have the +/- tolerance at .03V so start shift threshold could be as low as .04v I guess

    Thanks for looking

  16. Gear shift control

    in G4x

    Posted

    I'd like to try it,  the guys I got the box from use the gear barrel position to trigger it and looks ok in their videos,  I've asked if they would share their gear control settings with me so see what they come back with. 

    I think they are only using g4+ though so the dog unload will be extra

    Will share my file tonight,  

    Thanks

  20. +14v B Loom

    in G4x

    Posted

    Hi all, 

    Does the Storm G4X use the +14v in the B Loom? 

    I see in wiring instructions it mentions monsoon and fury don't use it and all others do but then in the storm pinout diagram it doesn't show it

×
×
  • Create New...