Jump to content

shinty

Members
  • Posts

    11
  • Joined

  • Last visited

Posts posted by shinty

  1. 35分前、アダムは言った。

    しかし、上のスクリーンショットでは、DI6は「アクティブ」と表示されています。

    Even if you don't press the AC switch, if you set the drive type to low or high, it will become active ... Once you set the clutch to be engaged, you will not be able to disconnect the AC clutch unless you connect it to the PC link.

  2. 22分前、アダムは言った。

    ACリクエストはスクリーンショットでアクティブに表示されています。

    Zuf0t8g.png

     

    Aux 3をテストモードに設定すると、ACクラッチは機能しますか?

    czXJSyM.png

    I tried various methods on the AC clutch control screen.  I tried turning the pull-up on, setting the operating state to low or high, and setting the ON level to low or high, but under no circumstances I could not turn it on or off with the AC switch on the air conditioner panel.

  3. 17分前、アダムは言った。

    ACリクエストはスクリーンショットでアクティブに表示されています。

    Zuf0t8g.png

     

    Aux 3をテストモードに設定すると、ACクラッチは機能しますか?

    czXJSyM.png

    Hello Adam In the test of the AC clutch sent by the screenshot, AC is turned on and cold air comes out properly.  However, even if the request and the AC clutch are active, the air conditioner will work regardless of whether the AC switch on the air conditioner panel is pressed or not.

    20分前、アダムは言った。

    ACリクエストはスクリーンショットでアクティブに表示されています。

    Zuf0t8g.png

     

    Aux 3をテストモードに設定すると、ACクラッチは機能しますか?

    czXJSyM.png

    To put it simply, AC works with a PC link, but the AC switch on the air conditioner panel does not work at all.  The AC switch is energized and the lamp is lit properly.

  4. 7分前、ブラッド・バーネットは言った。

    PCLinkでACリクエストデジタル入力を設定しましたか?場合によっては、DIが正常に機能していることを確認する必要があり、正しく動作するようにプルアップ抵抗の設定を調整する必要があるかもしれません。

    Thank you for your reply. I have set the input of the request to DI, but I do not know how to see if the signal is coming.  Which option do you choose to set the pull-up resistor?  thank you

    ちょうど今、シンティは言った:

    お返事ありがとうございます。リクエストの入力をDIに設定しましたが、信号が来ているかどうかを確認する方法がわかりません。プルアップ抵抗を設定するには、どのオプションを選択しますか?ありがとうございます

    I confirmed that all the wiring of the connector was correct.  The ac request is in DI6.

  5. hello everyone! I bought a plug-in this time and set it up, but the air conditioner alone doesn't work.  With the AC clutch setting, the clutch operates with PC LINK, but ON / OFF with the AC button on the air conditioner panel does not work at all.  Electricity is coming to the AC button, and the wiring is also connected.  Are there any other settings?

    I have been suffering from this problem for a few days.  please help me.  please

×
×
  • Create New...