RDantinne81

Ok. Thanks

Adam- Im wiring the same sensor for both my fuel temp/ pressure and my oil temp/pressure. I see the options for wiring to temp 1-4 (link fury) Selectable/no pullup, and fixed 1k pullup. Im not yet familiar with these terms. Could provide info on the wiring of the external resistor and which input should be used. Thanks

Does anyone have some experience on wiring an Arctic cat Z1 1100 engine into Polaris Rzr chassis. I have sourced all my sensors but am not seeing any info specific to my build in the help section. Ive wired the wideband and the knock sensor in. That was very easy. As for the E throttle, Ive located the motor connections but the remaining wires to throttle body im having trouble with. I see fps main and sub at the ecu but on the tb side im seeing Poti 1, 2 and Poti + and -. Im using the bosch PST-F multi sensor for my engine oil temp and pressure (located at original oil press location), and fuel temp and press (located at the fuel filter housing). Any advice on the wiring of these would be appreciated. Thanks in advance.