taku

How can I record the knock audio?

I don't do bubbling.

It is a LINK product that is directly connected to the knock sensor. If you knock out, I'm using a product that flashes red.

The detonation warning light flashes when the accelerator is off. What are the main causes?

Thank you. I asked a question because I wanted to refer to the target air-fuel ratio.

I'm sorry. I'll ask you this question. Thank you very much.

What is the numerical value of the SR20DET target air-fuel ratio map? Is it possible to be taught?

I plan to install ISC as an afterthought. Where should I use the AUX? I'm using the ALTEZZA plugin.

I'll try to set it up. Thank you.

Thank you.

Do you know how to turn on the lamp on the AIM meter side when you set the anti-lag on the LINKECU side and turn on the switch?

I want to change from electronic throttle type to wire type throttle.

I'm trying to make it a 4 throttle at Altezza. Do you know how to set the wiring of the accelerator position sensor and the LINK side?

Thank you for making it easy to understand. How do you control the fan speed with PWM? Do you also need a corresponding electric fan?

Can it be set as an engine fan and air conditioner fan from Aux1?

If I want the fan to turn on when the air conditioner is turned on, can I do it with the setting on the link side?

How do you do the wiring processing and setting the link side when controlling the electric fan with Sylvia s15?

Thank you. If I use it for SR20DET, will it also be a reference value?

Do you know the Dwell timing reference value of the KTD C1 coil?

Thank you.

How do you determine the knock threshold of the SR20DET engine?

Thank you. I'll set it up and check it. Is it possible to set it up with AUX8? Is it possible to set it up with AUX8?

Nice to meet you all. Can you tell me about the caster setting on the LINKECU side? There is a possibility that it is not working.

I'm setting the canister purge in AUX8, but it's not working. What is the cause? Nice to meet you.

Thank you. I'll consider the product.