sparksj

That was it, table makes much more sense like that lol. Engine is running much better now. Thanks for the response and additional info on fuel and idle control!

Is this the calibration file? Here is an additional, longer trigger scope. I purchased a harness from wiring specialties that was mostly plug and play. 12-12-21 current.pclx Trigger Scope - 2023-12-21.llgx

Looking for any help getting my engine to run well enough to get to a tuner. 6.2 ls, new plugs, wires, cam and crank sensors. I believe cylinders 2, 4, 8, and 7 are not firing based on exhaust pipe temps after maybe 20 seconds of "running". I'm fairly new at this and have done all the setup so far myself just going through the manual and forum posts. Hoping someone can look though my setup and trigger scope so far and see what may be causing this. Timing related? I have verified spark, fuel, compression tested all cylinders, tried moving coil packs, injectors around, always same 4 cylinders cold. Any help would be appreciated! Trigger Scope - 2023-12-20 5;42;50 pm.llgx PC Datalog - 2023-12-20 this one.llgx