wheelbarra

Hiya i recently got my barra running and we are just playing with the tune to get it to run nice enough to get it to the tuners. For some reason if you tap the throttle it stalls on decell. I have zero idea why. Any help would be greatly appreciated as im VERY new to this! 8-3d.llg toon.pclr

thanks for your help, its much much happier. Now i can start to get the tune in the ballpark. ffff.llg toon.pclr

i changed the throttle body as that seemed to be causing a few issues. it seems to idle at around 950 now but i do know that the tps is still reading .5% or something. When i tapped the throttle it sat at 2000ish rpm long after i took my foot off. i have checked everywhere 3 or 4 times with brake cleaner looking for a vac leak and havent found anything and i have any vac hoses (besides fpr & map) blocked off as well. bbb.llg

yep the blade was in the throttle body 180 degrees out and the throttle stop needed adjusting. Once I recalibrated the aps & tps it was all good. Thanks for your help there. Next issue tho! Once i touch the pedal it will hang on to that rpm for a second but hen it will rev up and down a few times until it goes back to idle. Do you have any ideas about that? log and tune attached aaa.llg toon.pclr

Hiya i cant for the life of me get the e throttle to work with my extreme g4+ (bf falcon 6 and pedal) in setup mode it seems to work fine, switch it to on and it does nothing at all. I have had some errors come up in the event log. Pin 30 - fused power from battery Pin 87 - to the aux 9/10 14v Pin 85 - aux output e throttle (ai7) Pin 86 - from main relay The ethrottle relay is wired as follows: ECU Fault Code 82: TP(Main) NOT selected - E-Throttle 1 ECU Fault Code 73: Aux 9/10 Supply Error ECU Fault Code 70: E-Throttle Min %DC Limit ive attached some logs and the tune. Any help is greatly appreciated as this is all very new to me! bb.llg cc.llg dd.llg ee.llg toon.pclr