Jaxodell2021

Thanks so much for diving into this for me! I really appreciate it! I will try to change power supply to see if that fixes the issue. I will post again once I have tried changing the power supply.

Hey guys, Attached is the datalog. The can lambda never displayed any readings after I plugged in the CAN gauge Can Lambda Diag.zip

Vaughan - I do not have access to any additional CAN devices other than my Can gauge and Can Lambda. Adam - Unfortunately, I am away from the house this weekend but, as soon as I return on in 2 days I will try this and see what it does. Thanks so much for your help so far.

I pulled the terminating resistor and that didn't solve the problem. Please let me know if you can think of any other possibilities.

Fuel map tune WG (13 psi Spring) Timing table tuning try 2.pclx

Attached is a video of the car running showing the Lambda 1 status and Lambda 1 error. Sometimes it will flash to the number "2" in the lambda 1 error. IMG_8021.MOV

I believe the wideband is further from the tee than the gauge and yes that is what I meant by work. I will try removing the terminating resistor and see if that solves the problem. I couldn't think of anything else to try.

Mini R53 with link G4X trying to use Cantee cable to connect gaugeart can gauge and link can lambda. When I try to connect the can lamda or the can gauge separately they both work. However, if I have both plugged in, only the can gauge works. I have to unplug the can gauge to regain a signal to the link can lamda. I left the terminating resistor in my gaugeart can gauge. Is that what is causing the problem?