baboon8008

Hi, I have a G4+ connected to a Race Technology DL1 Logger (and Dash 2). I'm transferring data via CAN2. Everything is OK. Ive just added an Oil Pressure sensor to AN5 using Cal Table 7. I'm getting the data in the ECU but nothing at the DL1 orDash2. I'm assuming the issue is at the DL1 end but just wanted to check if there is something I need to do to 'map' it to a CAN port Cheers Chris

Brilliant thanks. Makes sense (now ). So if I use an AN Temp i dont need to do anything else.

The Link ECU needs a 0-5V analogue input, so surely I need a 0-5V sensor. If its only 2 wire sensor then I cant supply the sensor with +5V power from the ECU, and then get a 0-5V signal back Cheers

Thanks. Its the 0-5V sensor that is proving problematic to find Cheers Chris

Hi, I'm looking for an Oil temp sensor that I can use with my G4+ ECU. I assume I need a 2 or 3 wire 0-5V sensor? Would this coolant sensor work with oil? https://dealers.linkecu.com/NTC1-8_2 Does anyone know of any other sensors that are available. Also, I assume I take the supply from the +5V on the expansion connector? Cheers Chris

Thanks for the reply. I'll go through the AI's and have a look, and also look at the predefined ones Cheers

Hi, I want to add an oil pressure sensor into the ECU and can use a spare 0-5V input. When I choose this, I can then use use a CAL table for setting up the scaling. How do I know if that CAL table is already is use for another analogue input Cheers