-
Posts
16 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
dibzer's Achievements
-
You guys should make a YouTube video on it to show people how to set them up
-
Ahh okay I fixed the keypad turning off, was a lose connection in the Deutsch connector. It hasn't turned off at all now so I think that issue is fixed. Can I have more help setting up a fan override? I made the GP Output but how do I connect that to the fan?
-
CAN 1 with 1mbit/s. As soon as we switched the keypad to 125kbps it made the CAN Lambda, CAN Gauge stop working. However on CAN 1 when switched to 125kbps to see if the Keypad would like it, it shut off and didn't turn back on until with switch it back to 1mbit/s. I'm going to buy another CANJST to put onto CAN 2 and dedicate the keypad to that only, then set it to 125kbps and hope that works. Would you be able to explain why the keypad was lagging and shutting off randomly when we tried to edit something etc, is that because its trying to work off CAN 1 at 1mbit/s?
-
The keypad has miraculously turned on after I reset the battery. But as soon as I go make any changes to the colours of the buttons to test if it works etc. it will work then suddenly not turn back on for a bit. Then randomly turn back on. Sometimes once pushing the button there is an long input delay. I'm also very confused on how to assign say, manually turning my fan on on DI #1. How do I set up the keypad? I can't find any information on it for G4+. I'm thinking of upgrading to a G4X ECU, but after a short search will my G4+ tune not be able to transfer over to a G4X ecu?
-
Do you recon I try to make it run off CAN 2? Because CAN 1 has a few devices on it currently such as CAN Lambda, CAN Gauge
-
-
Hey Adam, got this from Blink for you guys. Let me know your thoughts on why you think my Keypad isn't working, I've attached my tune and log for you a couple messages above. Thank you
-
Just checked over everything, everything is plugged into CAN 1, I rechecked all connections and everything is correct. Did it say what the error was?
-
Everything should be connected to CAN 1, I don't think anything is connected to CAN 2. I will check that out and let you know
-
I don't have any CAN sniffing tools CAN 1 is where the Keypad plugs into the ECU correct? I have a CAN splitter as I run CAN Lambda & CAN gauge. Do you know what the error is? How do I check what node it's set too?
-
tune with keypad.pclr log keypad.llg
-
Still no luck, I've copied everything correctly and triple checked but no lights or anything coming on the keypad. I have the 4button 2200_SI model keypad. Video link of it not working but powering on https://drive.google.com/file/d/1tCNTi9cpMQ9jhby-M7rf4OHzhSc6Xcy-/view?usp=sharing
-
-
dibzer reacted to a post in a topic: Link keypad on G4+
-
Thank you, the config he attached, am I able to import that without overriding anything in my current tune? Or just manually copy what hes done there
-
@Adamw Hey Adam, I sent my 4button keypad to Blink, they updated it to the Motorsports firmware. I can't get it to show up on my ECU at all. I've got a G4+ E36 plugin ecu. When I turn the car ignition on, the keypad does flash and does its on sequence then turns off. Under the mode section, "Link Keypad 1" also doesn't show up for me on my ECU. Any help will be greatly appreciated thank you