Trauma

Yes, last I checked it was green. Just cant figure out how to narrow down the problem. It may be the canbus adapter that needs a update. Has anyone the settings for the canbus adapter for the racetechnology dash 2? or used the Race-technology adapter?

The canbus adapter from Race-technology is configured for vipec. And I have sett up the vipec according to the race-technology website. http://www.race-technology.com/wiki/ind ... NInterface I was told that even if the canbus adapter was not configured properly, the monitor would show some data, maybe not correct data, but som data. I do not get anything, therefore I am wondering if it is the vipec it self that is not sending the data, that is why I want to know if there is anyway of checking the signal coming out of the vipec without using the canbus interface.

I got a Vipec V44+ serial number 10121. I have a race technology display, and it works with the serial adapter. I also have a canbus adapter from Race technology, but can get that to work. Using the monitor on the serial adapter, I can see the all the data that the serial sends. But with the canbus I cant see any data. Is there a way to test the canbus, to check if it is sending data? I have checked the wiring, and with all connected together it reads 60ohm, as it should be according to Race-technology. Only thing I have not tested now is the canbus output. Any input on this would be appreciated.