Robzter

Got everything to runt today. had alot of trouble with fuel delivery. had to have master fuel on 50ms and +50%. got it to runt but sudenly while we took the car for a small drive the front injector gave up. so now i tried putting 2 of my secondaries as primaries and now it runs and starts all nice. so i could lower it to 10ms and +0%.

All the basemaps i got is told to be for E85 :/ A friend of mine will come by to check basemap. hope he can fix it

No errors. somethimes i get a little poff. spark on all plugs. how do i test the timing? all injectors click when i test them. fuel pump is hard to miss. it runs fine. TPS is calibrated and map sensor is the correct one from the list.

Tried the basemap and didnt get it to start

The pcl file I have is named wankelv88.pcl. I also downloaded one I found on rx7club.com, did get it to start for a few seconds. I have a time at another tuner in about a week do would be good if the car was starting before that.

Hello. I bought a vipec v88 for my rx7. i run 2x1260cc precision injectors on primary and 4 bosch 1680cc bluetops on secondary. 45psi och base fuel pressure with E85. also run quite agressive ports on this engine. I got a basemap from the tuner i bought the vipec from but i cant get it to start on it. anyone have a basemap that could work?