Filin_Dma
Members-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Filin_Dma
-
Hi guys, Anybody made reverse for the CAN Elantra 2014 year, 1.6 engine? It has Bosch ME17.9.11.1?
-
Hi, Sorry for delay. I used reluctor OEM cam sensor
-
Sorry, guys. All works after upgrading firmware)
-
Its a very strange, but this features does not work. I dont see any virtual aux for shifting. Only DIx
-
Thank you for helping. Removing springs and some handmade tricks with calibration helped ьу. Even with removed spring it didnt work. I noticed that after calibration TP, TP(sub) is different from TP(Main). I have changed TP(sub) voltage Open or Close to rich TP(Main). Now I have the next headache with E-throttle Open and Close Loop. I removed ISC valve in hoping to get idle only with DBW. When I switch DBW open or close loop my RPM become unstable and rise to RPM limit. 1000 RPM engine holds with only 0.5-1% TP and I think it needs too smooth regulation. Is it possible to get good idle without ISC only with DBW? Let me know please. Dima
-
Hello guys, I have just tried to set up BMW with S54 engine. All works instead of DBW. DBW does not open plate to 100%. It seems open about 50%. Parameters after calibration show 100% for APS and 100% TPS. If I manualy open TB, write Open voltage and Close voltage for TP it works but there is error for TP Target. Thanks)
-
switching between 3D and 2D table with 3D map is very usefull function. I can make my maps smooth, I am able to see how my ignition rises with RPM, how look engine VE at certain boost for example.
-
I worked out trigger offset with 1.6 Ford Fiesta several days ago. I used cylinder pressure sensor and inductive sensor for spark plug cyl#1, connected to usb scop. My offset was around -75degr, so I used 285 btdc. there are waste spark and sequental injection. The cam sensor has low level arm thresh. All work well.
-
thanks a lot, but what about switching to 2D graph? How can I switch it? Dima
-
Just now have finished EVO9 equipped Fury with MXL2 and found some bug: Internal Lamda is displayed incorrectly at the dash: in ECU-14.5 at the dash 10 AFR for example. Earlier with i88 and MXL I had such mistake. Is this AiMs bug or some with Fury? Let me know please
-
Hello, Why in the latest new software updates there not Table graph? I am able to choose it to see 2D or 3D maps view. Its very helpfull option to tune maps. thanks Dima