Zefy

I asked this once as well and wondering if the latest firmware updates have brought some solutions for this. When I asked before, the basic answer was sort of, not really. 
 Apparently the ecu is capable of seeing the signal and logging it, but it will only give you voltages and channel numbers. No labels, no scaling with units, and not able to use the signals for anything internal to the ecu.  There are many devices like that though on the market.  The SSI from innovate gives 4 analog inputs with a CAN pass through and there is also a 4 channel thermocouple version. https://www.diyautotune.com/product/innovate-motorsports-ssi-4-simple-sensor-interface-system-3783/#description PLX devices makes sensor modules that can be daisy chained together. This is the system that I have that I would really like to incorporate into my vipec and be able to use my oil pressure/temp and egt to trigger some failsafes in the ecu over CAN without eating up inputs I don't have. http://www.plxdevices.com/category-s/109.htm Haltech also makes an IO expander that has 4 analog, 4 digital, and 4 outputs that connects to their ecus over CAN. Megasquirt has a kit that is almost identical to this that you can customize. http://www.haltech.com/product/can-devices/haltech-io-expander-12/https://www.diyautotune.com/product/can-egt-8-channel-thermocouple-interface/https://www.diyautotune.com/shop/megasquirt-kits-components/gpio-boards/ I think all the motec datalogger stuff can do this sort of thing too that allows for usable inputs to the ecu...?      Really hoping that incorporating something like this into link or vipec is an option at some point. I need more inputs!