Hi having major hair loss problems with my Vh45.
Im trying to run it with a storm. Im running the coil on spark. I have 2 link ignitors wired into the coils as a wasted spark setup.
I have also wired the injectors in the same wasted spark sequence.
Now, I have wired the CAS as per link diagram, and run the sync setup etc. When i crank the engine the little leds on the ignitors flash in the right sequence.
At this point I will have to say that I am a newbe to this.
Right so I crank it, the Led's flash and after a lot of cranking the plugs are wet...well damp.
The link dosnt read any RPM's though.
I have fully rebuilt the motor and have got new...most things including a CAS
Cams have been reground by franklin cams.
Have NOT done a compression test yet
At this point im looking for, either a map that should run it, or a direction to go in please.
Cant help but feel that an extreme would have solved my issues...