Matt Fenton

Hi Scott Sorry for late reply. Yes the oil pressure is displaying correct on the link PClink. The oil pressure is calibrated in kPa. The ECU has been back to link to be CAN Enabled so it works via CAN. The Firmware is V.4.9.3 All other displays from the link such as h2o temp, oil temp, MAP and Inlet temp all display fine on the dash. We cant get anything for the oil pressure. Thanks Matt

Hi Guys, Could someone help. I am having the same problem with the IQ3 dash not displaying the oil pressure from my link G4 storm V1. It has been back to link for cam to be enabled, and I have the Vipec EFI cable. The problem is that the oil pressure does not display on the dash. All the other ecu parameters display fine but the custom channel. I have two custom channels ANV1 is oil pressure ANv2 is oil temp. I have configured the dash to diplay oil temp on custom channel 2 and it displays fine. Custom channel 1 displays 0 and we cannot get any value from it. I have tried all the values from above, and only displayed 0. What can we do to get a the display to work with the IQ3 from Link? And help would be much appreciated. Thanks Matt