jordi pirrie

Hi Jurgen I'm not sure if my link ecu has a onboard MAP sensor, My link ecu has a hand held tuning controller, I was also woundering how to adjust the pulse width on the 444cc injectors, as its running rough won't idle? I've taken some photos of the ecu, I would of attached them but the files are too big as 100kilobytes is the max attachment size, Do you have a E'mail and I can post you the pics?, Cheers for the help.

Also I was woundering, because the standard afm maxes out at 200kw, can I add a z32 afm, or is it better getting a map sensor?

Hi, I asumed that the link had an internal map sensor, So I thought it would run with out a AF meter. I hooked up the airflow meter and its running, but its very rich on fuel and running rough, How do I adjust the pusle width on the gtr 444cc injectors, to get a leaner fuel mix? cheers

Hi Jurgen, Cheers for the reply, I will post some pics of the ecu tommorow. As far as I know im running the standard rb30e auto tps, which apparently RB30 auto sensor includes the TPS + WOT + idle switches, where as the manual vl tps just has TPS + idle switches, maybe this is the cause for no fuel?

Hi I've just purchused a 3tm vl Lem with hand controller for my R31 skyline, Im running a high comp rb30e+t setup with big turbo, fuel pump, adj reg, 444cc gtr injectors and can't get it to start. It reads 100rpm when cranking and inj duty cycle reads 0%,I have spark, Im wondering will it run the gtr injectors. It was out of a vl (ripsv8) which was running a similar setup. cheers