Hi! Thank you very much for your answer. I get the information from racepak sensors in the screen but not ECU sensor I am novice at the ECU, I have set the Can settings, as the information I got with the cable: Generic Dash, CAN 1 I always get the same error when I use the cable SN 501520 Link G4 CAN interface cable. (COD error Type = 183 ID = 501520, Send Error. Template ID number expected.) It finds the cable but it always gets error code on it, it's a new cable. When I not use it, it works to read VNET without error code. But I want to see the RPM, oil pressure, boost pressure, water temp from ECU. I have updated dash's firmware and I can have both racepak and ECU cable in. I do not lose contact with ecu. I've tried to turn on and off the power on and take out the cable, but no contact with the ECU. Is it the wrong cable, or is there any settings in the ECU, I have not done right. Can I connect I88 directly to racepak IQ3 dash without linking it over racepak v-net? If possible, what cables do I need and how do i connect it? I have been in contact with the Swedish dealer, but they have no ideas what it could be.