Hadleigh101

Nissan Silvia s14 digital input from r154 speed sensor to link g4 xtream then using Aux output to speedo red/yellow wire any help would be great Aux 9 output from ecu

I currently have a r154 3 wire speed sensor that I am trying to get my speedo to work. I have a speed signal coming up on pclink but am struggling with the wiring to the speedo and getting it to read anything. Using Aux output to send signal to speedo. Any tips if you have done this before would be great .

How there I am using stock ignition on a 1uzfe non Viti and using a g4+Xtream with a modified 1uz Vvti base map. How do I go about setting up the ignition output for the igniters as the Vvti base map has all the ignition outputs locked As Vvti run cop cheers

Im currently getting ready for my first start up on a 1uzfe non vvti running stock ignition with link g4+xtream. i am using the vvti base map provided in pclink. i have changed the base timing to -4 offset and have changed the ignition main to twin distributor is it correct to set the ignition delay to 80us?and spark duration to 1.0ms? i have changed the trigger setup to 1uzfe too. any help or advice would be awesome cheers

Hi there ive got a speed sensor off a Toyota r154 gearbox (3wire) im trying to use this signal to run a Nissan s14 speedo is this possible? if so should the speed sensor signal wire be wired to digital input then use a Aux output to power the speedo? any help would be great. Using a g4+xtream