I have had some trouble with my link fury talking to my Racepak IQ3 display dash Followed the directions wrt the CAN setup in Fury and the help file The dash is happy with the 230-VM it sees it and uploaded the channels works fine I'm using fury can module 1 which I assume is the lower CUSB on the case Now the issue I'm having is no data comes to the dash over the can And when I plug the dash can CUSB it knocks out the PC link and ecu goes offline unplug it and it reconnects doesn't matter if I cycle power. As long as the dash is connected no PC link. Engine still runs fine though One very odd thing I've noted is and I think is important The Vnet module has a 3 pin connector that adapts from the CUSB on the fury to the V net standard flat 3 pin molex plug. If I just plug in just the CUSB cable and leave the molex connector disconnected that is part of the 230vm it still knocks out the PC link so is it a bad cable maybe I would think a cable not plugged into anything wouldn't be able to affect the PC link or am I overlooking something.
And I just did the new firmware update