fluger
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by fluger
-
-
It looks like the integrale8v is right, I managed to start the engine by disabling the camshaft timing, because the signal from the camshaft sensor was not received.
I enclose logs. -
You do not have the right information, on the motor M52B28 (single vanos) the sensor of the camshaft has always been magnetic type. In the M52B28 TU (double vanos) the hall sensor.
-
-
Yes, the first time I booted, I entered the unlock code, the status of ECU enable.
http://i.piccy.info/i9/d90c19ee515f657a717873d4a4e3868d/1496337749/262439/1147129/ms41m52b28.png
-
The problem is that the ECU does not work with the crankshaft sensor and camshaft M52B28. In the settings of the triggers indicated the type of sensors M52. The first triger was designated as a hall sensor, the second trigger was indicated as inductive. Engine does not start
The test of the injectors did everything OK, the ignition test is also OK, and when you twist the motor, there is no spark. At the input of the crankshaft sensor, the pulses are normal, they were viewed by an oscilloscope.Help me.
Does not work with crank/cam sensors M52
in G4+
Posted
On Tuesday I'll install the camshaft hall sensor from M50TU and try to start the engine again. I hope I succeed. It's bad that the manual was not described that the ECU can not work with the sensor from the M52.