hello, i am completely new to link. i am installing g4+ xtreme on a honda civic 96 ek3 with d15b engine. it has obd2a style ecu connector. i am installing it directly under the dash through the original ecu wiring. during cranking, on the trigger scope, there is no signal. rpm doesnt work too. i am only using the loom a on the g4+. and i am connecting the trigger 1 wire to the ckp positive, trigger 2 to cyp positive. and the white wire on the g4+ is the negative for the signal right? both of the white wire is connected to the signal negative side. trigger 1 black - connector C2 (ckp p side) white - connector c12 (ckp g side) trigger 2 red - connector c4 (cyp p side) white - connector c14 (cyp g side)