urabus

Thanks so much, ill take it to the tuner and see what they can figure out, i was hoping i could fix locally but ill have to make the trip. Thanks so much for the help.

Hi all, Ive been having issues with over fueling on my 2.3ltr EJ Version 6 STI. Every track day etc I do i fill the catch can with E85. I can smell fuel when you go WOT, its using bucket loads of fuel in general. WOT even for short bursts for drags or roll racing will fill the 700ml catch can within a few passes with fuel. I have attached tune file and log. I usually run about 24psi of boost and this is more boost than originally setup on fueling tables etc, i am wondering if this has anything to do with it? Or could it be the VIPEC V series not doing the 'Flex Fuel' very well? Any advice? Thanks to all. 342KW-V6sti.pcl Log 14-04-21 2;53;01 pm.zip

Absolutely fantastic work. Thank you very much for the support. Im using the OPEN loop map and its perfect. Beautiful lumpy idle from the 272 cams but smooth and consistent. Doesnt nearly die when you blip throttle and doesnt rev hang whilst driving. Again, thanks very much! Others, if you want the setup of my car (which suits the above map) let me know and i can post more details if needed.

Wow! Thank you so much. Ill load them in now and give them a try. Fantastic help by the way. Ive playing around with this myself for ages but also ive had 3 tuners here in SA have a go at it and no one can work it out. Thanks, ill report back.

Im in South Aus. Thanks for the help. I cant find RPM lockout on my settings... and now notice that my idle is set to 'Open Loop' which cuts a heap of settings out. Checking the standard V5-6 base map shows its set to 'Closed Loop'. I might try imitate the base map into my current file and see if i can check the RPM lockout setting you suggest.

Hi all, I have a Version 6 STI here in Australia. Running a 2.3ltr EJ on the Plugin Vipec ECU (V44 Topboard) I have always had idle issues but they are much worse since the new motor has been installed. Tuner doesnt seem to think there is much of an issue \ finds it hard to get the time to explore the problem. Ive uploaded a log file 18MB here to my paid Office365 OneDrive: https://rowlittcom-my.sharepoint.com/:f:/g/personal/j_rowlitt_com/EgoQKxvBVqNIl89wmf82v4oBxxaSdM8ZNbnko5abJgYewQ?e=dgHEef Attached is a ZIP containing the above log. Main issue: Drive around and come to a stop (or clutch in and roll) and the RPM wont drop below 1500-1600RPM at idle. Car is fully warmed up - Normal idle is approx 900rpm - I found by switching the Air Conditioner ON and then OFF it will "reset" the idle and it will drop to 900RPM and not rise back up. If you then drive off it will again idle at 1500-1600RPM. Or even if you free rev it to past 1500RPM it will not drop back to normal idle. Please if someone can look at my log file and tune file and see perhaps if there is something we are missing. Much appreciated! ICSPRAY-Change.pcl Log 16-11-20 3;20;09 pm.zip