gordonm
-
Posts
8 -
Joined
-
Last visited
Reputation Activity
-
gordonm reacted to ClintBHP in Evo IX - ECU fault code 50 An Temp 3 below
Yes PCLink see attached picture for the settings.
You can see all the runtime values by pressing F12 and selecting Analogue.
You can clear faults once fixed by going ECU Settings and Clear ECU Fault Codes.
-
gordonm reacted to ClintBHP in Evo IX - ECU fault code 50 An Temp 3 below
The ECU has internal Pullups on the ANTemp inputs, so you could try disconnecting the MAF, if the voltage goes up to 5v then the sensor is at fault, if not the input pin is shorted to earth somewhere.
-
gordonm reacted to ClintBHP in Evo IX - ECU fault code 50 An Temp 3 below
As long as ANTemp2 is working and set to Inlet like the base map you can just turn that ANTemp3 MAF Temp to OFF dont forget to goto ECU Settings and clear ECU fault codes.
