lekonna Posted May 28, 2012 Report Share Posted May 28, 2012 Hi all, i've read some old topic about il pressure sender at viewtopic.php?f=3&t=490&p=3469&hilit=oil+pressure#p3469 I've got the same sensor, i was just wondering the table since RayHall seems to setup the resistance values in the table so that 1000Kpa hits the 130Ohm column in the table. Should i just follow what the man said or interpolate so that the 160ohm is at 1000 Kpa place? It propably has to do with the internal pull-up inside vipec, so it is pretty hard to go and guess what the correct values are without knowing what the pull-up resitor value is. br, Janne Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.