EssexStu Posted October 18, 2012 Report Share Posted October 18, 2012 Hi all, wanted to check something was ok before implementing... About to wire in an additional electric water pump for additional coolant flow... I currently have the fan's wired into the normal fan speed control. While looking for the best option of wiring up the water pump, found high fan control My fan is set to come on at 90 to drop 3*C am ok turning the high speed fan on (electric water pump) at a lower temperature than this, or will the ECU not understand? ie, are the two linked or totally seperate. Was possibly putting the electric water pump on around 60 to run all the time while the engine is warm Thanks Quote Link to comment Share on other sites More sharing options...
nissan200sx.dk Posted October 18, 2012 Report Share Posted October 18, 2012 You could just use a GP output.... There you can set up to 3 different parameters to turn on. And combine it with the virtual AUX to get more parameters for turning it on. Quote Link to comment Share on other sites More sharing options...
EssexStu Posted October 19, 2012 Author Report Share Posted October 19, 2012 Thanks, am still learning... that looks like it will do the trick thankie! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.