hi im trying to setup logging on my new g4+ setup for tuning afr's and cant find how to get afr readings .my g4 has it as wideband .i see lambda 1 and anv6 lambda ,i want tps,,map and engine speed how can i do this! also when i look at my fuel and ignition maps it has an option to view as a table .once again in the g4 software i have a table and the conventional map but again i havnt figured out how this is done .thanks
https://1drv.ms/u/s!AsueBbAiWzmW1TxrDmM2AzueA-ZN?e=zL2A15
Update your firmware, yours is very old so I suspect it doesnt have the AEM calibration included that you are trying to use. Logging is the same as G4, hit F8 to start and stop logging or click the words "PC Log = Off" at the top right of the screen.
K key swaps between text and surface view on any table. See this video if you want to set it up with both text and graphic view side by side: https://youtu.be/Eo9zBcIkacs
Also, since you are new to the software I would suggest you go t